The parchment shade conceals a Pyrex globe but is not the original, which was more decorative. This lantern was restored by Steve Retherford for Mike Coon, whose collection this is in. It is unknown if the base and burner originally went together. And what fuel do they use? Our mission is to provide information and support of the hobby of Coleman collecting.
The pump system was changed - an air tube was threaded from the base of the pump to the top of the fount so gas would not leak out in case of check valve failure. The brackets in the middle portion of the ventilator center the mica globe image above. Note the early filler cap shape and downturned baffle plate found on Quick-Lites in this period. This lamp appears to have a separate pump, which is not with the unit. Many features may not work properly without it.
These are are quite fabulous lanterns and easy to work on. While I have not yet cleaned the mica, nor given the frame and tubes a proper clean up, I use a size globe and simply take the vent and glass off to light. The chat room can be at times be a raucous area, please be advised. The result was the Model R, and its height allowed it to illuminate the pages of a reader's favorite Mark Twain novel.
By Model - International Coleman Collectors Club
It is a Quick-Lite lantern that has two mantles and a mica chimney and used to be nickel-plated, but a newbie took initiative to strip it down to its brass base. This lamp came with a compressed air kit, which helps it ignite. Most Coleman experts today estimate that only about of the Parlor lamp were shipped, due to the fact that very few in existence are known.
Model was the first of many successful single-mantle lanterns for Coleman. In Coleman advertised an accessory ventilator, No. Any help would be appreciated.
Note the pattern around the base of the handle - if it's Coleman, it is indicative of a Canadian-made lamp. Other L pump handles have a nearly flat top or a top with rounded lobes. At a whopping fourteen pounds before fuel, eight-inch diameter, and twenty-inch height, it was hard to carry. It sports two chimneys and a mica globe.
Coleman US lanterns 1920 1930
Coleman was never satisfied with the Air-O-Lite lamps because they didn't light quickly enough. Glenn, is there a source of info on dating these? Do not make your case in a post. Both have mica globes built by Mr. This lantern is dated Dec.
Coleman quick lite lantern
Coleman US lanterns The Terrence Marsh Lantern Gallery
The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. Model Canada The lamp was made in both the U. There are other examples of Coleman lantern models badged or marked for other Federal and state agencies on the next page and later. It is roughly the same lantern, but it shunned the wood handle as a fire hazard. It measures about four feet tall and welcomes guests to the store on a daily basis.
It is undated, but is presumed to be from the early s. It has a single burner that produces candlepower and a tank that holds a half-gallon of gasoline. It was simply an Air-O-Lite lamp that had a kerosene burner - two mantles as opposed to one. It is not moderated, but it is recorded in chat transcripts, even private chats are logged.
Moderators can not address member problems that occur outside the forum, sales, trades, personal messages. Especially good for night fishing. They were not popular, as they were heavy, bulky, and had an s style with matching amber shade. Although this lantern has a later style baffle plate, hook the usual baffle plate in this version is as in the lower image.
- Less than of them were shipped, and many have been lost with time.
- The original globes in these lanterns were mica.
- Welcome to the Coleman Collectors Forum!
As a result the bail will not detach from an assembled lantern. Arcolite by Yale This lamp is mysterious, but it appears to be similar to a lamp originally made by the Yale Light Co. Mica globe with a door that lifts for lighting.
This lamp also includes a shade not pictured. Rude behavior can be looked up when a complaint is made. If you encounter a problem with bad behavior, contact a moderator to address it.
The collar, generator, dating is and cap nut are different from that model. We think the different style of the valve knobs indicates the type of generator. The rarest part of this unit is the porcelain globe fitter with the tall antenna.
Harold, I posted in your other thread regarding this lamp Jan. Password Forgot your password? Is there anyway to tell what year it was made in? It too has candlepower and holds a half-gallon of gasoline, but has a much different fount, which is smaller and rounder. Despite the setbacks, the lantern sold well - after all, a candlepower portable lighting machine was enticing for many workers of the time.
Coleman quick lite
- Other than that there is nothing.
- Tank cap is winged as well.
- There is no stamping anywhere on the fount nor is there any patent date on the air tube.
- It appears to be an L or similar model.
- Today, the fitter is worth well over the price of the lamp itself.
Jerry s Coleman Collection -- Coleman Lanterns I
Please upload the file as a post attachment instead. Coleman continued making these lamps until the Great Depression made it unfeasible to do so, and they never returned to the bracket lamp business once the economy improved. This also uses Coleman's Instant-Lite technology, dating a match-lighting of atomized fuel.
How to Date your Coleman& Lantern or Stove Old Town Coleman
Records are unclear of how much of each were shipped, or how Coleman distinguished between the two in Hiram Strong's absence. There is Coleman printing on the bakelite part of the center shaft. Thus, the fount is a lower-grade steel, which would become normal for Coleman lanterns in the ensuing decades. Model L is a Quick-Lite model with a wide ventilator. Collar has Coleman Quick Lite, The pump is built on, not in the found.
These instant-lighting lamps have two mantles which produce candlepower in total and are outfitted with mica globes. The mica globe is a reproduction by Fred Kuntz. Images of the ventilator for this lantern are below. The shade here is original and covers the Pyrex globe, caerus ag dating fa and the fount has a built-in pump.
Coleman's dream of being able to create a gas-powered lamp that lit as quickly as a light bulb. This Quick-Lite sports a curved air tube with a support rod, and an angle valve hidden underneath the globe to control the amount of lighting. They were the first Coleman model to have a pump as part of the lantern. It is more common than its sister, and presumably came after.
Coleman lantern Models left and the earlier L right. Failed filename Unsupported photo file type. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.
The first production of instant lighting lanterns was in March, when Coleman made the L and L above- missing mica globe. The ball nut on this version of Model L, dated stamped Feb. Note the air tube along the left side of the fuel pickup tube, which is necessary for the Instant Lite feature.